Sep 17, 2014
Home | Tools| Events| Blogs| Discussions Sign UpLogin

3 Ways to Maximize Your Milk Components

June 28, 2013
Silage   Ron Kuber 4 09 011   Copy

It really starts with forages.

Source: Purina Animal Nutrition

When it comes to optimizing a cow’s ration for milk components, there are three areas that dairy producers should focus on for maximum results. That’s according to Dr. Andy Mueller, manager of dairy nutrition and technical support with Purina Animal Nutrition.

Mueller says too often people try to jump to amino acid balancing as the answer to maximize milk components. But it really starts with forages, he says.

1. Put up quality forages.

"You can’t correct something that’s uncorrectable," says Mueller, explaining that if forages are put up poorly there’s not a lot that can be done. "Mold impacts rumen fermentation and if you’re dealing with moldy forages you will not be able to maximize rumen performance and therefore milk components, no matter what you do."

Focus on making sure forages are harvested at the correct moisture, packed well, stored well – using two layers of plastic, and an inoculant to insure they are free of molds and yeast. "It’s not just about the quantity of forages put up, it’s also about quality forages," says Mueller.

2. Properly mix and deliver TMR.

After quality forages, making sure the total mixed ration (TMR) is mixed properly is the next step to maximize components. "It can be as simple as a TMR being over or under mixed – both change what the cow actually eats and how the ration ferments in the rumen," says Mueller. "Both scenarios will cause issues with rumen pH and health." The ration should be as consistent as possible at every feeding.

Mueller shares that a herd he recently worked with ran a TMR audit. Based on the information from the audit, adjustments were made in the mixing order of the feeds and the mixing time. The herd’s butterfat test went up .20 percent and protein went up .10 percent. "We didn’t change the ration, we just changed how it was presented to the cows," he says.

Kicker plates, knives and weight bars should have periodic maintenance performed to make sure they are performing as they should be. "Something as simple as driving over a pothole can cause the weight bars to be off kilter," says Mueller.

In addition to making sure rations are being mixed properly, feed should be pushed up regularly to reduce slug feeding which can alter rumen pH which in turn impacts diet digestibility.

Previous 1 2 Next

See Comments



Market Data provided by
Enter Zip Code below to view live local results:
The Home Page of Agriculture
© 2014 Farm Journal, Inc. All Rights Reserved|Web site design and development by|Site Map|Privacy Policy|Terms & Conditions