What’s the Best Way to Calibrate My Yield Monitor?
Jan 02, 2013
Question: What is the best way to calibrate a yield monitor, and why is it that a poorly calibrated monitor can still match scale tickets?
Answer: A poorly calibrated yield monitor can still match scale tickets, but it doesn’t mean it always will. And just because your yield monitor matches scale tickets for the field, doesn’t necessarily mean the monitor is calibrated correctly. A poorly calibrated monitor can under-estimate high yields just as much as it over-estimates low yields, which means you could be pretty accurate on a whole field basis.
Yield monitors generate a source of geo-referenced yield data that can enable growers to document the extent of spatial yield variability within fields. That’s what we’re after—spatial variability. A well calibrated yield monitor will show more definition in our field maps, making it easier to see the management zones and the variations within those fields.
We have even seen accuracy decrease slightly with a good calibration, but the maps will show better spatial variability. This can happen because now instead of over-estimating by 2% and then under estimating by 2% creating a wash, we over-estimate by 2% all the time. This will create a map that better shows variation and at the end of the year can be accurately scaled down 2% to show real yields.
As for actually calibrating the monitor correctly, you will need to calibrate at various crop flows. Pick the most consistent yield spot in your field and run multiple loads at differing speeds. Doing so will ensure that you are calibrated for differing flows (i.e. differing yields). If your monitor will allow, run four to five different calibration loads. If your monitor will only allow for two calibration loads, like a John Deere monitor, for instance, make sure you are running both a normal flow and a low flow for increased precision and spatial variability.
All calibration loads should be between 5,000 lb. and 8,000 lb. and should not be unloaded on the go. You should also avoid passing waterways or any inconsistent yielding areas in the field. Also, check the accuracy of the yield monitor calibration throughout the season by harvesting and weighing loads and recalibrating as necessary.
For more specific calibration steps, consider the information provided here: Calibrating a yield monitor by Bob Nielsen at Purdue University.