Aug 28, 2014
Home| Tools| Events| Blogs| Discussions| Sign UpLogin


In the Shop

RSS By: Dan Anderson, Farm Journal

As a farm machinery mechanic and writer, Dan brings a hands-on approach that only a pro can muster. Along with his In the Shop blog, Dan writes a column by the same name as well as the Shop Series for Farm Journal magazine. Always providing practical information, he is a master at tackling technical topics and making them easy for all of our readers to understand. He and his wife, Becky, live near Bouton, Iowa.

In The Shop: The Skinny On Installing Bearings

Feb 08, 2011

 Kudos to Timken Bearings! I installed a Timken pillow block bearing today, and included in the box was a nice little set of instructions with useful tips on installation that answered many questions customers have asked me over the years. Here's a quick rundown of the pertinent points:

First: the brochure states on its cover that, "...this product is manufactured by American craftsmen in Pulaski, Tennessee, U.S.A."  Hoo-rah, Timken!

Second: Here are snippets from the brochure that speak to questions I've been asked:

-"The bearing should not be mounted on a worn section of the shaft." Yes, you can "peen" the shaft or use Liquid Metal to fill the gap between a worn shaft and a new bearing, but it's a stopgap, emergency measure that will not last long.

-"Rotate lock collar...by tapping lightly with a drift punch in the direction of shaft rotation." There's no need to smack the lock collar super-tight. In fact, over-tightening often cracks the cammed face of the bearing race where the lock collar attaches, requiring replacement of the "new" bearing.

-"General Relubrication Recommendations: Indoor service--not required. Outdoor service--2 - 3 times per year. Severe outdoor exposure--once a month. High contamination/washdown--once a week. Relubricate until a thin bead of fresh grease is visible at the seal lip."  My rule of thumb: follow the machine's owner's manual recommended lubrication interval, but UNLESS SPECIFICALLY DIRECTED BY A MECHANIC YOU TRUST, do not grease more often than recommended. As it says in the brochure: "Excessive relubrication may cause high operating temperatures due to grease churning."

Isn't it cool what a guy can learn if he takes time to read the instructions...?

Log In or Sign Up to comment

COMMENTS

No comments have been posted, be the first one to comment.

Hot Links & Cool Tools

    •  
    •  
    •  
    •  
    •  
    •  

facebook twitter youtube View More>>
 
 
 
 
The Home Page of Agriculture
© 2014 Farm Journal, Inc. All Rights Reserved|Web site design and development by AmericanEagle.com|Site Map|Privacy Policy|Terms & Conditions