Aug 27, 2014
Home| Tools| Events| Blogs| Discussions| Sign UpLogin


In the Shop

RSS By: Dan Anderson, Farm Journal

As a farm machinery mechanic and writer, Dan brings a hands-on approach that only a pro can muster. Along with his In the Shop blog, Dan writes a column by the same name as well as the Shop Series for Farm Journal magazine. Always providing practical information, he is a master at tackling technical topics and making them easy for all of our readers to understand. He and his wife, Becky, live near Bouton, Iowa.

Not So Funny Noises From Combines

Oct 06, 2013

 You're running your combine and hear the following sounds. Can you diagnose the cause?

(a) "bam!" or "pop!" when engaging the separator or unloading system--followed by slow shaft speed warning buzzers going off in the cab.

(b) rapid-fire rattling, the smell of burning rubber--and slow shaft speed warning buzzers going off.

(c) an increasing odor of burning rubber accompanied by a whap-whap-whap sound.

(d) a clang-clang-grinding sound that's only evident when the combine is running "empty" on endrows.

Possible causes for the harvest-halting noises...?

(a) a sudden bang or pop when separator or unloading system is engage, followed by slow shaft speed warning buzzers, is often the result of a shear bolt breaking on an auger or belt drive. Identify why the shear bolt broke before replacing it. If there is no obvious clog, slug, plug or obstruction to cause the shear bolt to break frequently, be suspicious that the holes in the hub or pulley are egged-out with enough freeplay to shear the bolt during normal operation.

(b) the rattle of a slip clutch is familiar warning that some belt, conveyor, auger or other system is overloaded. Determine the cause of the overload. Don't give up till you find the cause. Unless severely worn, slip clutches don't lie.

(c) it's never a good thing to smell burning rubber on a combine because it's usually from an overworked, over-heated drive belt. If the odor is accompanied by a whap-whap-whap sound, it means the belt has begun to delaminate and strands of the belt are flailing against nearby machinery. Ignore the smell and sound long enough, and the sound of a slip clutch rattling will soon be added to the mechanical symphony.

(d) augers with failed bearings make a clanging sound when they hit their housings. They may run silent when full of grain, but get noisy on endrows when the combine empties out. Any unusual noises that appear on endrows or when combines are running empty suggest significant problems that need to be diagnosed.

And finally, here's a noise I heard in a combine cab that only took a few seconds to figure out. I was riding with the operator, and kept hearing a faint voice saying, "Hello?  Hello?" There was a brief silence then a string of faint profanity, as the operator got cussed out for accidentally "butt dialing" his best friend.

Log In or Sign Up to comment

COMMENTS (1 Comments)

MarcoAtlarge - Wild Rose, WI
Ever see what a backup a pumpkin can make on a 12 roll husking bed?
7:32 PM Oct 6th
 
Legacy Newsletter
 

Follow Us

Facebook Twitter You Tube
 

Hot Links & Cool Tools

    •  
    •  
    •  
    •  
    •  
    •  
    •  

facebook twitter youtube View More>>
 
 
 
The Home Page of Agriculture
© 2014 Farm Journal, Inc. All Rights Reserved|Web site design and development by AmericanEagle.com|Site Map|Privacy Policy|Terms & Conditions