Jul 13, 2014
Home| Tools| Events| Blogs| Discussions| Sign UpLogin


In the Shop

RSS By: Dan Anderson, Farm Journal

As a farm machinery mechanic and writer, Dan brings a hands-on approach that only a pro can muster. Along with his In the Shop blog, Dan writes a column by the same name as well as the Shop Series for Farm Journal magazine. Always providing practical information, he is a master at tackling technical topics and making them easy for all of our readers to understand. He and his wife, Becky, live near Bouton, Iowa.

Confessions of a Tool Abuser

Oct 11, 2012

 I've long advocated proper care and maintenance of tools. I just haven't done it myself. My toolboxes are full of examples of how NOT to use and care for tools.

The toolboxes in my service truck are good examples. I was too cheap to pay the extra price for "road boxes" when I outfitted my truck. I bought normal tool chests designed for use in a shop. "Normal tool chests" aren't designed for the vibration and bumps and jolts common to highway transportation, let alone bouncing across corn rows at 30 mph. That's why I eventually had to drill and rivet gusset plates in the corners of those mis-used tool chests--the corners had begun to buckle and sag because I was using them in ways for which they were not designed.

I've got a couple flat-blade screwdrivers, and one Phillips-head screwdriver, that are my designated "beaters." I religiously try to use my other screwdrivers only for removing or installing screws, but there are occasions when I need to use a screwdriver as a temporary chisel or punch. I console myself that of all my screwdrivers, I only abuse those three.

I'm ashamed of the way I abuse drill bits. I'm always in a hurry, rarely able to use a drill press, and I end up trying to force one of my oft-abused drill bits through a piece of metal using a hand-held drill. It would help if I'd at least squirt some WD-40 or other lubricant while I'm drilling, but I'm usually hanging upside down or dangling off the edge of a machine, so I don't have a free hand to spray while I drill. The result? I've got a drawer full of drill bits with blue, burnt tips. Last time I checked, damaged bits outnumbered "good" drill bits 3 to 1.

The list goes on: my sockets get used as seal drivers, my wrenches get used as pry bars, my steel toed boot gets used as a wheel chock (it's a long story...) and the 9-inch pliers I carry in a pouch on my belt get used as a hammer, pry bar, can opener, and splinter-puller. Now that I think about it, the only tools I own that get used ONLY for their proper purpose are my hammers.

But I use them a lot, and enthusiastically.

 

Log In or Sign Up to comment

COMMENTS

No comments have been posted, be the first one to comment.

Receive the latest news, information and commentary customized for you. Sign up to receive Dairy Today's eUpdate today!

 
 
 
The Home Page of Agriculture
© 2014 Farm Journal, Inc. All Rights Reserved|Web site design and development by AmericanEagle.com|Site Map|Privacy Policy|Terms & Conditions