Sep 22, 2014
Home| Tools| Blogs| Discussions| Sign UpLogin

The Basics of Zinc

August 27, 2014
By: Darrell Smith, Farm Journal Conservation and Machinery Editor
FJ 038 F14312
  
 
 

Know where to look for deficiencies to set the stage for preventive management

Minor element, big potential for trouble. Fortunately, zinc deficiency occurs only in certain soil conditions and environments, but in the right circumstances—for example, calcaric soil with a high pH reading—zinc deficiency can easily rob 15 bu. to 20 bu. of corn per acre, says Farm Journal Field Agronomist Ken Ferrie.

"Zinc and other minor elements aren’t called micronutrients because their  role in crop production is minor," Ferrie says. "On the contrary, they are called micronutrients because plants only need small amounts, compared with macronutrients such as nitrogen, phosphate and potash. 

"Micronutrient problems can often be fixed with small applications—from 1 lb. to 3 lb. per acre. But if deficiencies are not corrected, they can have a serious impact on yield," he adds.

Beginning with zinc, we’ll take an in-depth look at micronutrients in upcoming Nutrient Navigator articles. "Micronutrients are sort of like vitamins," Ferrie says. "Even if you consume a healthy balanced diet, you can run into trouble if you are missing just one vitamin. It’s the same with crops and micronutrients."

In plants, zinc plays several important roles, all of which help drive yield. 

"Zinc is involved in protein synthesis," Ferrie says. "It plays a big role in grain and seed production, especially silk emergence in corn, because it affects the flowering parts of the plant. Zinc helps drive metabolic processes and helps the plant maintain its hormonal balance."
FJ 038 F14312 b 1

In corn, zinc deficiency causes shortening of the internodes, so plants are shorter. In this Farm Journal Test Plot, conducted by Farm Journal Field Agronomist Ken Ferrie, the corn on the right is taller because the starter fertilizer contained zinc. The shorter corn on the left received starter fertilizer without zinc.

 

Problem-prone soils. Since zinc deficiency is not common, there’s usually an underlying reason when it occurs, Ferrie says. Understanding those reasons will tell you where and when to anticipate problems.  

"Zinc deficiency is common in calcaric soils because they tend to be alkaline," Ferrie explains. "In high-pH conditions, zinc becomes immobilized and unavailable to plants. Expect zinc problems if soil pH gets above 7.2."

Sandy soils are also prone to zinc issues. "Because they are highly leachable, those soils can’t hold the amount of zinc plants need," Ferrie says. "Abused, eroded soils also might not contain sufficient levels of zinc." 

Organic matter content is a factor. "You’re more likely to have zinc issues in soils with 1% organic matter than in soils with 3% to 4%," he says. "At the other extreme, organic soils with 40% to 50% organic matter content also are prone to zinc problems." 

Problem environments. Certain environmental conditions set the stage for zinc deficiency. 

"The most common zinc deficiency situation I run into is when a farmer has cold, wet conditions at planting, the corn emerges and then the temperature drops," Ferrie says. In this situation, a soil test would show adequate levels of zinc. But reduced microbial activity, resulting from the lower temperature, reduces the soil’s ability to release zinc for the plants. 

"Keep this in mind if you’re pushing the planting window, planting corn as early as you can," he adds. "You might want to consider a hybrid that’s good at taking up zinc because some hybrids are more efficient than others." 

Soils that have been overlimed might have trouble taking up zinc. "Overliming is most common in no-till and strip-till," Ferrie notes. "It happens when farmers apply too much lime compared with how much they  incorporate it. Two or three tons of lime per acre is fine if you incorporate it with tillage, but without tillage, the surface pH might become high enough to trigger a zinc deficiency."
FJ 040 F14312

Severe zinc deficiency symptoms are visible in the bottom leaf. The symptoms first appear as interveinal yellowing or white streaks between the leaf veins on the lower half of the leaf. When the deficiency becomes severe, the striping grows into wide bands between the midrib and the edge of the leaf. 


A surplus of a major nutrient can trigger problems with micronutrients, Ferrie says. With zinc, problems might occur in soils that are excessively high in phosphorus. 

"One role of zinc is to move phosphorus from the root system into the plant," Ferrie explains. "If the proper ratio of phosphorus to zinc is maintained, then the process works as it should. But if the ratio gets out of balance, it leads to a higher concentration of phosphorus in the root system, which limits the ability of the plant to take up zinc, as well as sulfur." 

Fields where manure has been over-applied are candidates for zinc deficiency. "Zinc deficiency is most likely to occur if a farmer bases his manure application rate on his nitrogen recommendations," Ferrie says. "If you apply enough manure to supply all your nitrogen needs, you may end up over-applying phosphorus."  

Diagnosing zinc problems. If you suspect a zinc deficiency, there are three ways to confirm it: 
  • soil testing 
  • tissue testing 
  • visual symptoms 

Soil testing might be the least effective. "With zinc and all other micro-nutrients, soil testing is subject to a range of possible errors," Ferrie says. "To begin with, it only tells you whether the soil levels are low, medium or high."

Soil testing laboratories also use different extraction procedures, which produce varying numbers. With the same soil sample, you might get a reading of 1.5 parts per million (ppm) zinc from one laboratory and 3.0 ppm from another just because they use different extraction procedures, Ferrie cautions. If you want to track soil zinc levels over time, be sure to use the same laboratory for all your testing." 

Tissue analysis will reveal zinc deficiency in your plants. "With corn, you need to do tissue testing early in the season," Ferrie says. "A mild zinc deficiency will disappear by the time corn gets knee-high, having had its impact during the first three to five weeks of growth. Pulling a tissue test at pollination or ear fill won’t reveal that early season deficiency."  

Identifying zinc deficiency symptoms is easier in corn than in other crops. "In corn, you usually see deficiency symptoms from emergence to knee-high," Ferrie says. "Because zinc is not a mobile nutrient, look for symptoms in the new growth at the top of the plant.  

"In new corn leaves, the symptoms begin as interveinal yellowing or white streaks. They are similar to symptoms of manganese and iron deficiency. But with iron and manganese, the yellow or white stripes run the full length of the leaf, while zinc stripes are primarily in the lower half.

"If a zinc deficiency continues to show up after corn is knee-high, it’s pretty severe," Ferrie continues. "With severe deficiencies, the slight striping grows into wide bands between the midrib and the edge of the leaf. Normally, the symptoms disappear with age, but if they don’t, you will see a reddish caste in the area where the leaves turn white." 

In addition to leaf symptoms, zinc deficiency causes shortening of the internodes. So shorter plants might be a clue to a zinc problem.

Zinc deficiency is less common in soybeans, where it reduces flowering and delays pod growth. Compared with corn, it is more difficult to diagnose. "In soybeans, a zinc deficiency has to be pretty severe before you can see symptoms," Ferrie says. 

With soybeans, symptoms include stunting of internodes and yellowing, which eventually turns brown, between the leaf veins. The leaves will be a little crinkled. Both of these symptoms can be mistaken for a herbicide reaction.

In small grains such as wheat and barley, zinc deficiencies are hard to visually diagnose. "In this case, we have to rely more on tissue analysis," Ferrie says. 

"If you have a rotation of soybeans, corn and small grain, pay attention when the field is in corn," Ferrie adds. "If you have a zinc deficiency in corn, pull tissue tests when the field is in wheat."

One good thing about zinc is that there are many ways to manage it and prevent deficiencies. "In environments where you know you have zinc deficiencies, you can put zinc in starter or broadcast fertilizer or you can foliar feed zinc," Ferrie says.


Timing and placement of zinc fertilizer are the keys to its efficiency and effectiveness. We’ll discuss zinc management in the next installment.


FJ 038 F14312

Learn and Profit from Nutrient Navigator

The Nutrient Navigator series focuses on efficient, environmentally sound management of nutrients. The goal is to provide practical knowledge that helps drive yields and profits higher.

www.FarmJournal.com/nutrient_navigator 



 

See Comments

FEATURED IN: Farm Journal - September 2014

 
Log In or Sign Up to comment

COMMENTS

No comments have been posted



Name:

Comments:

Receive the latest news, information and commentary customized for you. Sign up to receive Top Producer's eNewsletter today!

 
 
The Home Page of Agriculture
© 2014 Farm Journal, Inc. All Rights Reserved|Web site design and development by AmericanEagle.com|Site Map|Privacy Policy|Terms & Conditions