$200 Double Your Money Winner:
Flexible Feedline Adapts to Cattle Size
We built a self-adjusting feedline that accommodates all sizes of cattle from calves to 2,000-lb. cows. We used a 1¼" pipe that floats within 11" long by 3" wide strap iron brackets, which are welded to upright 2½" pipes about 12" above the concrete wall. The bracket is bent 1½" at 90° and notched with a semi-circle on both ends so it fits tight against the post. Cows can lift the pipe with their head, yet the calves are not strong enough to lift the pipe and slip out.
Joshua Wipf’s family operation raises crops, hogs, turkeys, dairy cows and beef cattle.
Quick-Attach Torch Caddy for Welding Trailer
I attached my torch caddy to my welding trailer for portability. I spent $30 on gate latches and attached them to scrap pipe. I welded the pipe onto the side of my trailer. One latch is low to align with the caddy axle and the other is high to attach to an extra horizontal pipe I added to the caddy. For safety, the tanks should always be firmly secured.
Hope Hull, Ala.
Receiver Hitch Holder Organizes Pickup Bed
Everything is thrown into my pickup bed including hitches and pins. So I made a receiver hitch holder and welded it to the handlebar of my portable air compressor. The hitch receptacles are made from three 1" sections of 2½" square tubing and welded to a piece of flat iron. Hitch pins drop into strategically placed holes that don’t interfere with the operation of the air compressor.
Share your unpublished ideas to join our $100 Ideas Club. The Double Your Money winner receives $200. Other farmers featured receive $100 each. All winners receive a hat. To submit your unpublished idea, which must include a description, photo or sketch, address and phone number, write to $100 Ideas, Farm Journal, P.O. Box 682, Johnston, IA 50131, email $100-Ideas@farmjournal.com or fill out the entry form at www.farmjournal.com/enter_100_ideas. All published material becomes Farm Journal Media property.