An AgWeb.com Farm Equipment Special
CLAAS has introduced its very versatile XERION 3800 tractor. featuring three model configurations, with up to 320 horsepower strength.
The three model styles include:
* XERION 3800 TRAC (cab fixed in central position)
* XERION 3800 TRAC VC (cab rotates 180 degrees)
* XERION 3800 SADDLE TRAC (cab fixed over position of the engine)
According to the company’s new product announcement, this multi-functional machine makes the most of its power and capacity in an assortment of agricultural uses; tillage, planting, mowing, spraying, high-capacity manure work, silage pit work and grain or silage hauling. The XERION is also capable of snow removal, ditch mowing and forestry work.
Mechanical features include a permanent four wheel drive, 100% front and rear differential lock, a 100% central differential lock (locks front with rear axle) along with four equally large tires maximize floatation and traction while maintaining a small 20 ft. turning radius. With full-frame construction design, the 57%/43% - front/rear weight distribution provides excellent tire traction at low air pressure to reduce soil compaction and fuel consumption even while taking on the heaviest of loads.
Bob Armstrong, North American Product Marketing Manager. says, "The XERION 3800 offers the greatest versatility found in any one machine in North America. With a Caterpillar six-cylinder engine and continuously variable ZF transmission, the power and simple agility of such a unique machine will set a new standard of flexibility and in-the-field performance for CLAAS."
With the touch of a button on the control unit, the XERION can be driven in six different steering modes to make best use of the machine's potential while minimizing fuel costs and soil disturbances, e.g. with crab steer. The XERION provides superior maneuverability with its intelligent four-wheel steering, presenting the greatest flexibility to producers of any type of operation.
On the XERION 3800 TRAC VC (Variable Cab) the entire cab can be rotated 180 degrees in less than 30 seconds without leaving the seat, enabling the operator to view rear-mounted implements even while reversing.