Have You Made Your Harvest Schedule Yet?

September 6, 2016 10:00 AM
Have You Made Your Harvest Schedule Yet?

It’s prime time to walk fields to check for any possible issues that could alter your harvest timeline. When you’ve battled Mother Nature all season to make sure you reap the highest yields possible, there’s nothing more disheartening than yield loss you could have prevented so close to the finish line. Make it a priority to check each field for standability issues.

“Corn reaches black layer about 55 to 60 days after silking,” says Jeff Coulter, Extension corn agronomist at the University of Minnesota. “Check stalks at black layer when the grain is about 32% moisture.”

When you scout, check stalks in different parts of the field to get a handle on stalk quality. Be on the lookout for weak stalks, perform push tests, split stalks and pinch the lower portions of stalks to determine stalk strength and if the stalks are hollow.

“Anytime I get more than 10% to 15% hollow stalks, I tag that field as an early harvest option,” says Troy Deutmeyer, Pioneer field agronomist in northeast Iowa. “Things that could lead me to want an early harvest are nutrient deficiencies like nitrogen or potassium, leaf disease pressure and corn rootworm feeding.”

This year, increased rainfall could mean there are more instances of nutrient deficiencies due to runoff and
leaf diseases because of favorable environments. In fields where any of these factors are present, it will be especially important to check conditions before harvest.

“With harvest, there are a lot of logistics. Prioritizing can help you line up fields so harvest goes more smoothly,” Coulter says.

Standability issues don’t only affect corn—soybeans can wind up on the ground too. The more pods and beans, the higher the soybean yield, but the weight can cause standability concerns and seed shattering.

“Shattering can be more environmentally caused by wetting and drying of the pod,” Deutmeyer says. “Harvest soybeans in the 14% to 14.5% range to avoid shattering.”

If you only have one or two combines, it can be challenging to harvest every soybean field at exactly 14%. Overcome the challenge by planting a variety of soybean maturities to stagger harvest.

Planting different soybean maturities can offer a bigger payback than just staggering harvest. Standability in soybeans is dependent on variety, so planting a diverse group might help you diminish some risk over a large number of acres. When choosing varieties talk to your seed provider and review previous years notes to see if a product will stand up at harvest.

Going into harvest with a plan in mind will maximize operational efficiency, reap higher yields and boost your bottom line. Use the following 10 questions to devise your harvest plan:

1 What maturity was the seed? When you know the maturity, you can make a plan for when it will reach physiological maturity. Corn generally reaches black layer 55 days to 60 days after silking. At black layer, the
grain is about 32% moisture. In soybeans, aim to harvest at 14% to 14.5% moisture to reduce drying costs and splitting.

When did you plant the field? The planting date will tell you if the crop had stress early in the season and if it will be mature sooner than other fields. Early stress can cause lodging and other problems late in the season.

When did the field pollinate? Was there insect, nutrient, heat or drought stress during pollination? The plant puts all of its energy into producing ears during pollination. If it needs more nutrients or is under stress, it will steal from the stalk to provide for the ear. This hollows the pith and makes a very weak stalk that can easily be blown over by strong wind or by being pushed by the combine.

How does your rotation affect field health? Corn-on-corn fields face different pressures than a field rotated between soybeans and corn. There are fungi and diseases that never dissipate because the field never gets a break. It is important to be aware of any additional risks your crops might experience.

How does rotation affect disease history? Watch for overwintering diseases. Sudden death syndrome and northern corn leaf blight are two diseases that can be detrimental on corn and soybeans. Both overwinter in soil and corn residue. Keep track of where you had these problems to see if you need to take action.

What diseases or fungi are present in the soil? Soilborne issues such as anthracnose, southern rust, common rust, smut, gray leaf spot, brown spot and other stalk rots are present in soils. Keep an accurate history of your field and any areas with problems to track where you might need to spray fungicide or harvest early.

Was the field under stress this year? What kind of stress? Did you have drought, too much water or nutrient leeching? Drought can bring out mold, such as aflatoxin, which can mean problems at the grain elevator and harvest. Too much water might encourage stalk rots and cause poor standability. Lacking nutrients means the plant will rob from the stalk to feed the ear, which makes it hollow and easy to knock over.

What disease or rots are present now? Use pocket guides to determine what kind of diseases or rots you are seeing in the field now. This can tell you the severity of what you are dealing with and if it will have a big effect on standability the rest of the season. Leaf rots can also rob from the stalk, so it will be important to identify those while planning harvest.

Are there ears or pods lying on the ground already? A weak ear shank can cause big losses as your money literally falls to the ground with each ear you lose. The same goes for soybeans—as they hit the ground less money goes into your pocket. Be vigilant as you check for ears and pods on the ground so you don’t harvest too late and lose it all.

10 Does the stalk pass the push test? As you walk the field, push stalks to test their strength. If more than 10% to 15% don’t bounce back because they break, make that field a priority. That is a potential 10% to 15% yield loss and could indicate the rest of the stalks are also weaker and could fall with a strong wind.

Be thorough during your end of season scouting. You don’t want to lose yield—especially in a tight year when every bushel counts.

Back to news



Spell Check

Roosevelt, MN
9/2/2015 10:35 PM

  Hey agweb do you think that the only people that read your site are corn and bean guys. What a biased article. We in northern man have been harvesting for a month already and now get a break before corn and beans. Get with the real world and travel more than 50 miles from Chicago.


Corn College TV Education Series


Get nearly 8 hours of educational video with Farm Journal's top agronomists. Produced in the field and neatly organized by topic, from spring prep to post-harvest. Order now!


Market Data provided by QTInfo.com
Brought to you by Beyer