Delhi, IA — To help farmers and livestock professionals increase onsite efficiency, Paladin Brands' Light Construction Group has announced the introduction of its Side Discharge
Bucket for use with skid steer loaders. Designed by the FFC Division of Paladin, the bucket is offered in two configurations (and two sizes in each configuration) for use with either heavier materials like sand, or lighter ones such as sawdust, silage and feed.
The bucket is designed for use with most commercially available skid steers and offers a host of features to maximize ease of use and onsite versatility. These include right- or left-side discharge--selection is made by simply reversing the direction of the hydraulic flow from within the cab; ability to vary the distance material is thrown--again by varying the speed of the onboard hydraulics; and a removable belt cover to keep material weight off the belt and reduce the risk of stalling.
"We really feel this tool will fit a wide range of farm-related needs,” says Doug Sanderson, FFC's Chief Engineer. "We see the Sand Discharge Bucket being excellent for creating and maintaining animal bedding areas. The Sawdust model--which includes an agitator to improve material flow--is ideal for distributing silage or cattle feed into feed bunks. The operator can simply drive along the feeding or bedding areas at a slow speed and discharge the material, rather than having to dump it, get out and push it around.”
Additional features include a ½-inch grouser on the belt of the Sand Bucket and a 1-inch grouser on the Sawdust Bucket's belt to enhance material movement to the discharge chute, and a direct hydraulic drive on both models' conveyors as well as on the Sawdust Bucket's agitator to prevent material bridging. Each configuration comes in two widths: the Sand Bucket in 60-inch and 72-inch widths and the Sawdust Bucket in widths of 72 and 84 inches.
"We have even addressed the issue of wear on the front edge of the bucket caused by repeated loadings from piles,” says Sanderson. "We now have a bolt-on wear edge that can simply be removed and replaced. We are excited about the possibilities these units offer, and will probably be seeing uses even we didn't imagine.”
Paladin products are produced under these national brand names: Badger, Bradco, C&P, FFC, Genesis, Harley, JRB, Jewell, McMillen, Pengo, Sweepster and The Major. Each brand manufactures and distributes broad families of attachments for application in the forestry, light and heavy construction, utility and utility contractors, and demolition and recycling markets. All of the brand products are distributed through a national base of independent dealers, distributors, rental companies and original equipment manufacturers.