Seed to Success

March 7, 2014 07:57 PM
Seed to Success

Variable-rate populations maximize potential

The momentum behind variable-rate populations has never been greater. As farmers seize the opportunity to efficiently position plant populations for maximum yield, the industry is in lock step, offering multiple packages and platforms. The connectivity between data-driven decisions and in-field capabilities is only growing with programs such as Monsanto FieldScripts, Pioneer Field360 and the Winfield R7 tool.

When a field is planted to a uniform population, the farmer is settling for the happy medium, explains Farm Journal Associate Field Agronomist Missy Bauer. If they increase or decrease populations, they’ll see a bell curve showing some areas would like a higher or lower population.

"By using what we know about our management zones, farmers can prescribe planter populations for maximum yields with more confidence," Bauer says. "This is no different than manually lowering populations on the sand hills, for example. When we use prescriptions overlaid with management zones, it’s much more precise."

When mapping management zones, the same factors are taken into consideration to help guide variable-rate population decisions.

Read More

Maximize production

"To start, farmers should factor in their soils, yield history and productivity of the zone," Bauer says. "Is it a high-, medium- or low-yielding zone? What’s your soil data, cation exchange capacity, organic matter and water-holding capacity? The overall philosophy is to enable farmers to increase populations where there is higher water-holding capacity and decrease population where there’s lower capacity."

There are two ways to gain yields using variable-rate hybrids: Maximizing the good ground and reducing population in poor soils. Variable-rate population can maximize a soil’s water-holding capacity—lower populations on lighter soils and higher populations on heavier soils.

For some farmers, the end goal of adopting zone management is variable-rate population. Like training for the big game, 90% of your preparation is done before game day.

"With today’s technology and machi­nery, variable-rate populations by management zone have never been easier to execute," says Jack Hardwick, regional agronomist with AgriGold Hybrids in Missouri and Illinois. "In fact, it’s setting up your management zones and layering data that requires most of the work and time."

Hardwick advocates that farmers seek out advice and help from a local team of experts, whether that be the dealer who sold the desktop software, an ag retailer, a consultant or your seed rep.

"For example, when you write your population prescription map with your seedsman, you’re drawing on their expertise, as well. Together, you can really bring out the potential of a field," he adds. "It’s not an easy task to bring all of the pieces together. Farmers shouldn’t hesitate to ask for help with file transfer from their desktop to the tractor cab. File compatibility can cause a lot of frustration, and it’s better to manage it on the front end."

The first step in variable-rate populations is working with a seed representative to select the right hybrid.

"First, I have the farmer tell me all they can about the history of the field. Knowing things like yield environment and soil types help us then walk through the hybrid capabilities of stress tolerance, ear style and drainage tolerance," Hardwick says. "That is what will increase our success when varying the population."

zone map

Know your hybrids. Since variable hybrid systems aren’t commercially available yet, farmers should select a hybrid that will perform best across a majority of their management zones.

Without proper hybrid selection, farmers might be surprised by how their variable-rate populations perform in the field.

"We need to know all we can about our hybrids," Bauer says. "I see many mistakes made by not correctly taking that into consideration."

Farmers should understand the hybrid type and where the hybrid falls on the spectrum of fixed to flex ear types, Bauer says. Does the hybrid like high, medium or low populations? Work with your seed rep to find the base population rate for that hybrid.

For example, a hybrid might have a base rate of 36,000 seeds per acre, and depending on the management zone, that could go from 38,000 to 32,000, Bauer explains. On the other hand, another hybrid that is more of a flex ear type might have a base rate of 32,000, and based on soil characteristics, its variable-rate population could range from 36,000 to 28,000.

"Typically, we adjust by 1,000 or 2,000 plants per acre increments based on the water-holding capacities of the zones," Bauer says.

Working with your seed rep to fine-tune the seed populations will help increase confidence in the prescriptions.

"In soils with low water-holding capacity and the toughest parts of the field, pull back the population," Bauer advises. "Farmers are often nervous about reducing populations because they are used to higher rates. But we’ve seen certain hybrids in sandier areas increase yields by reducing population." 

That resistance to the lower populations might be the biggest struggle that farmers face.

"Farmers have a population number in mind that they don’t want to go below. It’s beyond their comfort zone, but 26,000 might be what a low-producing management zone needs," Hardwick says.

The rules still apply. Bauer reminds farmers that even as they adopt advanced technologies, the fundamentals don’t change. In fact, ear counts and uniform emergence could be even more important.

"When we are trying to be precise in our management, it’s even more important we know our planters are properly calibra­ted and we’re achieving the actual rates in the field," she says. "Achieving uniformity and plant spacing are key across the range of plant populations, and a farmer’s planter has to be ready for that."

Bauer says that as you increase populations, ear count must also increase accordingly. If not, yields could go backward. The target to shoot for is no more than 1,200 difference on average between population and ear count in a corn-after-soybean rotation and no more than 2,000 difference in that ratio in corn on corn.

As farmers gather additional data each year using variable-rate technology, it’s important to analyze the yield results on a continual basis.

"During the year, spend time in the field. Go out to the management zone and evaluate ear fill. You’ll want to see a little pull back on the ear tip—perhaps 1". If you aren’t seeing that, you could have gone higher in your populations," Bauer says.

Year to year, hone your population rates by running uniform population strips across management zones.

Review your data and compare to your variable-rate prescriptions.

"There’s a lot to learn. We’ve seen that when we push populations, farmers have to support that with the appropriate nitrogen. High plant populations in certain zones may require more nitrogen per acre," she says.

Bauer encourages farmers to keep asking questions as they adopt variable-rate technologies and continue to refine their management zones. 

To learn more about hybrid considerations and how to achieve success with variable-rate populations, visit

You can email Margy Eckelkamp at

(Click here to view larger PDF version of image.)

hybrids zone management

Back to news



Spell Check

No comments have been posted to this News Article

Corn College TV Education Series


Get nearly 8 hours of educational video with Farm Journal's top agronomists. Produced in the field and neatly organized by topic, from spring prep to post-harvest. Order now!


Market Data provided by
Brought to you by Beyer