The following commentary does not necessarily reflect the views of AgWeb or Farm Journal Media. The opinions expressed below are the author's own.
As a farm machinery mechanic and writer, Dan brings a hands-on approach that only a pro can muster. Along with his In the Shop blog, Dan writes a column by the same name as well as the Shop Series for Farm Journal magazine. Always providing practical information, he is a master at tackling technical topics and making them easy for all of our readers to understand. He and his wife, Becky, live near Bouton, Iowa.
When harvesting row crops, there comes a time when opening fields that it's often convenient or necessary to harvest across the endrows. This puts tremendous stress on harvesting heads, especially soybean platforms.
Cutting perpendicular to the rows forces the sickle to go from "no load" between rows to total load across the full length of the cutterbar in a split second. On a 24-row headland, the sickle has to absorb that shock load 24 times in only 10 or 15 seconds. A soybean platform in good mechanical condition will probably handle the abuse without damage, but a platform with a worn sickle or drive could fail under the rapid changes in load. Typical consequence is a broken sickle or snapped drive belt halfway across the headland--or halfway down the headland or into the field as damage that began on the headland finally reached critical mass a few acres later.
Corn heads are a little tougher than cutterbar systems, but the shock load of 8 rows of Bt-corn stalks supporting 180 bu./ac. corn has been known to cause aged or worn corn heads to shear gears or make slip clutches rattle.
To avoid shock loading harvesting equipment when harvesting "across" rows, turn the combine slightly or drive in a slight curve so that each row doesn't encounter the cutterbar or gathering components all at once.
No comments have been posted to this Blog Post